锂电池组装设备

News

Contact

Enterprise Name: Shenzhen Benice Technology Co., Ltd.

Contact person: General Manager Wu

Tel: +86-0755-28196400

Mobile phone: 15999617901

18938832955

Mailbox: szbenice@163.com

Fax: +86-0755-28196400

Shenzhen Headquarters: No. 5 Pengling Road, Dongkeng Community, Gongming Street, Guangming New District, Shenzhen City, Guangdong Province

Yongkang Branch: No. 78, Fourth Street, Huangcheng North Road, Yongkang Economic Development Zone, Yongkang City, Zhejiang Province

Yangzhou Branch: 230 Gaoyou Guoji Lighting City, Yangzhou City, Jiangsu Province

Zhongshan Branch: 7th Floor, Lixiang Building, North Road, East Bank, Guzhen, Zhongshan City, Guangdong Province

Website: en.oetlook.com


How to Clean up Lithium Battery Spot Welding Machine

Your current location: Home >> News >> technical analysis

How to Clean up Lithium Battery Spot Welding Machine

Release time:2018-11-29 Author: Click:

How to Clean up Lithium Battery Spot Welding Machine

First, oil stains and dirt must be removed before the task, otherwise the service life of the low electrode will be serious and the welding quality will be affected.

2。 After electrification, the welder should reflect on the electrical equipment, operating mechanism, cooling fragments, air passage fragments and whether there is leakage in the body shell。

3。 Before starting the welding machine, first turn on the switch of control circuit and the small switch of welding current, install the brake knife position of the series conditioning switch, turn on the conditioning buttons on the water source, air source and control box, and at first turn on the power supply, then stop the task。

4。 Electrode contacts should be kept bright and repaired with a fine file or abrasive cloth if necessary。

5. Bearing hinges and pistons and lining rings of cylinders of welders should be smooth in current life.

6。 Gas passage is fragmented and water cooling fragments should be dredged when welding machine is working。 Gas must be insistently dry and should not contain water。 Drainage temperature should not exceed 40 C。 Drainage flow can be adjusted according to the season。

锂电池点焊机

北京赛车高频开奖记录 秒速赛车官网 秒速赛车 北京赛车开奖结果记录 秒速赛车官方网站 荣鼎彩开奖 北京赛车开奖记录 内蒙古快3 北京赛车开奖结果历史 北京赛车开奖记录